Single Elegant Speed Turnstile Hot Selling Automatic AI Acess Control System

Single Elegant Speed Turnstile Hot Selling Automatic AI Acess Control System

Description of smart Spped Gate

The speed gate organically integrates machinery, electronics, microprocessor control and various reading and writing technologies. The standard electrical interface is adopted externally, which can facilitate the system integration of magnetic card, bar code, ID card, IC card and other reading and writing equipment. It provides a civilized and orderly way of passage for people in and out, and prevents illegal people from entering and leaving at the same time. The system is also specially designed to meet the fire-fighting requirements, so as to ensure the smooth passage and smooth evacuation of personnel under economic conditions.

Specification of Pedestrian Speed Gate

Features of Turnstile Speed Gate

1. Anti tailing function: there is an infrared light band detection area in the channel. The switch state can be adjusted by software according to the accuracy requirements of customers to adapt to the application of light bands with different needs, so as to avoid the shortcomings that the point infrared detector is easy to be polluted and affect the judgment reliability, and can effectively judge the followers who have not read the card. When the infrared detector returns to the effective position of the cardholder, it will be determined by the infrared detector system. After the door opening signal is sent, there are still some abnormal uses that will trigger an alarm.

2. Abnormal use:

• when the door is closed, the reverse intruder enters the door body after the authorized door opening signal is sent. Before passing the first safety photoelectric detection belt, if the reverse detection belt detects someone entering, as long as the person does not leave, the buzzer will always give an alarm, the door remains closed, and the "aging" function does not calculate the time interval at this time.
• When the door is opened, reverse intrusion. After the door wing is opened, if an unauthorized pedestrian enters the door detection area in the reverse direction, the door will be closed immediately. As long as the first protective detection belt detects the presence of someone, the "time effect" function will not calculate the time at this time. When the person leaves the second detection area, the door will resume normal operation.
• When pedestrians leave, they break into the second safety detection area in reverse. Before the door returns to the basic state, if there is no legal door opening signal, the second safety detection area detects someone entering, and the alarm system sends an alarm. But as long as someone is still detected in the protection detection area, the door will not be closed.
• The time gap between the first detector detecting the pedestrian and the last detector leaving the first safety detection belt is about 0.25 seconds. After the pedestrian leaves the first safety detection belt, when the card reader signal does not send out to open the door, the first detection area detects a pedestrian (follower), the alarm sounds for a long time, and the door is still open.
• After the normal trailing pedestrian leaves the protection detection area, the first safety detection area detects the intrusion of unauthorized persons, the door is closed immediately and the alarm sounds for a long time.

3. Drive: DC servo drive

4. Response of door body in emergency: in case of sudden power failure during operation of the door, the door wing will stop at the original position and can be pushed freely, or a 12V battery can be connected externally (in case of power failure, the swing door can be opened by brief energization of the battery). An emergency button can be installed for each equipment according to the requirements, and the selected emergency response mode can be activated by pressing the button. Generally, open the channel in case of danger or panic. In case of emergency, such as bandit alarm, the channel can be closed manually through the remote control button. After power on or in case of emergency, the rear door wing will reset automatically after the self inspection is free of obstacles.

Functions of Turnstile

1. Using triple pedestrian protection: infrared sensor anti-pinch; pass logic anti-pinch; return when blocked

2. With normally closed mode and peak traffic mode, normally closed mode is divided into normally closed locking and normally closed non-locking two modes

3. It has strict anti-trailing alarm function and anti-reverse illegal passage function to ensure the legality and effectiveness of passage

4. Memory opening, delay closing and overtime closing functions; the function of counting the number of people passing by

5. The channel can realize two-way traffic, the gate can swing in both directions, and the stroke is less than or equal to 180°

Pedestrian Dimenssion

Pedestrian Turnstile Gates Applications

Pedestrian turnstile gates have a wide range of applications.Since pedestrian turnstile gates are used to control people traffic flow, for entrance security, and for identification purposes. The
gates can really be used anywhere. These turnstiles are most often used in high-traffic transportation hubs like subway systems, train stations, airports, and bus terminals. Also They are used at
high-end buildings, offices, gyms, football stadium, etc. They can even be fitted with card readers for completely autonomous operation, as well as QR code readers, face readers and fingerprint
readers. DOOR can provide a wide range of integration with these readers.

FAQ

1. What is the strength of your company in this industry?
A. Established in 2011, having over 10-year manufacturer experience.
B. Having metal sheet factory, assembly factory and office over 10,000 ㎡, can cover a high volume production.
C. There is an over 200-person R&D team, including pedestrian turnstiles and parking software and firmware developing, structuring and testing person.
D. Listed company, have a high and strict process of orders,production and shipping.
E. Modern machinery for production, such as Laser Cutting Machine, Grooving, bending, welding, engraving,etc. More detailed pics can check our factory info.
2. What is your Quality Control?
We have a average 10-year experience QC team. They had a good teamwork to check raw materials and finished products to ensure the quality.

The samples will be fully tested, and the bulk goods will be sampled for careful inspection, and the QC staff will also conduct inspections during the production process.
3. Do you provide customization?
We have a 20-person customization team to cover our clients’customized requirements. We also provide OEM and ODM service.
4. Could you tell us your after-sale service?
Timely support is a necessary. We provide free online support 24/7.We are expanding overseas outlets to cover your after-sale service.
5. What would you do after the warranty?
We provide 2 years warranty, some of high products are with 24 months warranty. If out of warranty, we will provide free lifetime online services, and help to replace accessories.
6. What’s your capacity of your factory?
Yearly capacity:12,000units for pedestrian turnstile gate,20,000units for parking devices.
7. What are your optional list for your products?
Wireless control for pedestrian turnstiles, housing color changing,size changing, material SUS316 available, logo printing, add photocell quantity, etc.
8. How can we be your exclusive distributor?
To be our exclusive distributor, firstly you need to have your sales
and technical team; Secondly, industry experience is required.

Screwless Pedestrian Speed Turnstile Gate

Pedestrian Speed Gates Aluminium Alloy

12 pairs Slim Speed Gate Turnstile

Single Elegant Speed Turnstile Hot Selling Automatic AI Acess Control System Images